Gypsum Powder Manufacturing Process

Gypsum Powder Manufacturing Process Machine

With a forklift to transport the raw materials warehouse gold ore; installed in simple bars on the raw materials warehouse bucket sieve, the gold ore raw chunk size greater than 1000mm of material removed ( the raw material warehouse stacked side, regularly handling ), less than or equal to 1000mm gold ore into the raw materials warehouse. Once installed in addition to the raw earth vibrating screen feeder positions under gold ore need to be screened out first sieve, gold ore sieve into the Gypsum Powder Manufacturing Process Machine broken. The remaining gold ore into crushing jaw Gypsum Powder Manufacturing Process Machine, a jaw broken by a belt into Gypsum Powder Manufacturing Process Machine secondary crushing, small gold ore crushed by the belt conveyor into the second round vibrating screen for coarse screening first greater than 30 mm of gold ore belt returns to the Gypsum Powder Manufacturing Process Machine broken again, less than or equal to 30 mm is pulled third round vibrating screen for fine screening, screening out less than or equal to 5 mm powder and 5 ~ 10mm, 10 ~ 20mm, 20 ~ 30mm stone three specifications of the finished product, is less than or equal to 5 mm powder with a belt to pull out storage yard stand. 5 ~ 30mm finished yard with belt pulled out gold ore5-30mm Gypsum Powder Manufacturing Process Machine accounted for about 75%.

Gypsum Powder Manufacturing Process

Gypsum Powder Manufacturing Process Machine Note

  • 1, bearing shoulder Gypsum Powder Manufacturing Process Machines full load, so good lubrication for the bearing life of a great relationship, it directly affects the life and Gypsum Powder Manufacturing Process Machines operation rate, thus requiring the injection of oil must be clean, seal must be good.
  • 2, the newly installed wheels prone to loosening must always check Gypsum Powder Manufacturing Process Machines wheels.
  • 3, pay attention to check the degree of wear of wear parts, pay attention to the replacement of worn parts Gypsum Powder Manufacturing Process Machines.
  • 4, put the activities of the Gypsum Powder Manufacturing Process Machine chassis plane should avoid activities out dust and other materials bearing on the bottom shelf can not move Gypsum Powder Manufacturing Process Machines could not have broken the material, resulting in a serious accident.
  • 5, bearing temperature rise, the reasons should be eliminated immediately stopped and checked.
  • 6, when the turning gear operation should be immediately stopped if the impact of the sound check and eliminate.

Request for Quotation

You can get the price list and a SBM representative will contact you within one business day.